|
 Eternabond
One Step Miracle RV Roof Tape
Specifically
designed for the RV'er. One Step utilizes Eternabond's patented
adhesives with integrated primers and a specialized white UV
stable backing. Perfect for all RV roof repairs and maintenance.
Truly a one step process. Very little pre-cleaning necessary.
Did you know RV roof seams require yearly maintenance? Use One
Step over factory roof seams one time and never do roof seam
maintenance again! Lifetime warranty! One Step will never
shrink, crack, peel, or lose its grip. Comes in a handy
resealable carrying case. Great for tank repairs.
 Eternabond
WebSeal (formerly WB-Seal)
WebSeal is 30
mils thick and is available in rolls 50' long, 4" wide.
WebSeal has a woven backing laminated to our industrial adhesive
tape. Easy to work with and extremely flexible, WebSeal forms
around almost anything from a seam or tear to a leaking drain
pipe. Once on it stays flexible but never loses its adhesion if
properly applied. When used in a place exposed to sunlight,
WebSeal is easily protected from UV rays using our flexible
drying U.V. Protector, which brushes on easily and is included
in all our product kits and can be tinted to match almost any
color. Economical and easy to use, WebSeal continues to be the
product of choice for repairing or reseaming RV and mobile home
roofs, steel roofs, and more!
 Eternabond
A-Seal
A-Seal has the
same aggressive sealing qualities as WB-Seal, but has an
aluminum backing laminated to our adhesive. The aluminum backing
is 4-mil thick aluminum sheeting, not 2-mil foil like most
tapes. Consequently, A-Seal requires no UV protection and
can be painted to match the repaired surface color. A-Seal is
perfect for truck trailers that have been cut or simply need
resealing over seams and rivets. It is also perfect for storage
tanks, steel and aluminum roofs, etc. A-Seal comes in standard
rolls 20 mils thick, 50' long, and 4" wide.
 |
Eternabond
RoofSeal (Gray/Black)
RoofSeal
is the best solution for leak repair or corrosion
protection in tough environments and conditions,
including land-fill and pond liners. Our specialized
backing has proven to be UV stable, even after 16 years
in full sunlight. Our patented adhesive has an
integrated primer which allows RoofSeal to BOND with the
surface it is installed on. Perfect for reseaming all
roofs, regardless of the material. Rubber, fiberglass,
aluminum, modified, shingle, PVC, steel, hot-tar, etc.,
RoofSeal makes a permanent water-tight seal. Elongation
factor greater than 700% guarantees RoofSeal will flex,
expand and contract in all conditions, even on liners!
Can be installed to -20 degrees F (with our EternaPrime).
Sag rating of over 250 degrees F. 10 year warranty. Also
great for tank repairs. (Formerly MP-Seal) |
 Eternabond
DoubleStick
Utilizing our
aggressive sealing adhesive, DoubleStick is sticky on both sides
and is perfect for use as a gasket when installing windows,
vents, etc. on RVs, mobile homes, steel buildings... Once
DoubleStick is applied, you can virtually forget about leaks!
In addition, DoubleStick can be folded or rolled into a bead for
areas that need a thicker gasket. DoubleStick comes in standard
rolls 60 mils thick, 50' long, and 2" wide, and can be
special-ordered in 4" and 6" wide rolls.
 Eternabond
EternaPrime
Use EternaPrime
when surfaces to be bonded are very dirty (oxidized and cannot
be cleaned), or dusty (like on a tar and gravel roof).
EternaPrime will prepare the surface by coalescing all loose
particles into a solid platform for the Eternabond tape to
adhere to. Also use EternaPrime if the installation temperature
will be below 40 degrees F (except when using MP-Seal and One
Step, which can be applied down to zero degrees F).
|
